Home
Products
Services
Validations
Quality 
FAQ
Sitemap
Enquiry

 

Positive Pressure Modules

Click Here for Advanced Cleanrooms Products

'AEROMECH'  positive pressure modules are designed to  provide a clean area within a small enclosure  or  cell.  These  pressure module adopts the same LAMINAR AIR FLOW principle.

Pre filters are fixed at the rear end  of the unit and the  blower  assembly  used in the system sucks the air & passes to  the HEPA filter chamber where the air is filtered to the  maximum level.
  

  Model No.
Capacity Ft 3 / Min
For Room size No.  Ft.

CPM 500

500

8 x 8 x 8

CPM 1000

1000

10 x 12 x 8

 

Dimensional details
Model No. CPM 500
HEPA Filter size 24" x 24" x 6"
Face Velocity 25 FPM
Overall Size 26" x 26" x 32"
Model No. CPM 1000
HEPA Filter size 24" x 24" x 12"
Face Velocity 250 FPM
Overall Size 26" x 26" x 38"
 
Particle retention 0.3 micron
Cleanliness CLASS 100
Overall CLASS 10000
Power supply 220 V. Single phase

The  Basic  cabinet  is   fabricated  from pre treated   industrial block board  with exteriors covered  by  decorative   laminated sheets    &  interiors  coated  with     synthetic    rubber  paint. Alternatively, the total construction  may be  of   CRCA  sheet metal  with  suitable MS structures & finished by epoxy  paint or powder as per requirement.


Click Here for Esco cleanroom Products

     Products
     Air Curtains
     Air Showers
     Bio Safety Cabinets  
     Fume Exhaust Hoods
     Garment Storage Cabinets
     Horizontal laminar Air Flow
     Vertical Laminar Air Flow
     Dispensing / Sampling Booths
     Positive Pressure Modules
     Softwall Clean rooms
     Bag Filters
     Fancoil Filters
     Fine Filters
     HEPA Filters
     Mini-Pleat HEPA Filters
     Pre Filters
     ULPA Filters
 Servicing & Validations
     DOP HEPA Filter Integrity Test
     Particle Count Testing
     Flow Visualization