| Mini-pleat hepa filters are available in the following
standard sizes |
| 1220 x 605 x 80 mm |
| 915 x 605 x 80 mm |
| 605 x 605 x 80 mm |
|
Non-Standard sizes can also be manufactured as per specific customer requirements
|
| The filter can be assembled with / without flanges |
| Available in casing thickness from 1 to 1.5 mm in variants
of Mild steel/Galvanised steel/Aluminium/Stainless steel |
| Powder coating is the standard surface finishing offered
|
| Filtration media is all glass, microfibre, fire retardant
hepa filtration media manufactured by M/s.Lydall Inc,
USA |
| Aluminium separators made from 0.04 mm thick aluminium
foil in the case of deep pleat version. |
| High impact poly styrene seperators in the case of mini
pleat version |
| Synthetic soft rubber gasket with dovetail joints. |
| Epoxy & Silicon Sealants |
| Initial pressure drop of 18 mm WC for deep pleat filters
and 14 mm WC for mini pleat filters |
| Suitability to class 100 clean rooms and work stations
as per FED:STD:209E |
| Efficiency 99.98% down to 0.3 microns. Suitable for H13
class as per EN779 |
| All filters are particle counted and DOP leak tested |
| Filter construction as per recommendations of
IES-RP-001 |
| Each filter is accompanied by a test certificate |
| APPLICATIONS |
| Clean rooms for micro component electronic manufacture &
assembly |
| Pharmaceutical Processing |
|
Aerospace Engineering
|
| Genetic & Biological research |
| Biohazard Atmosphere |
| Laminar Flow Workstations |
| Bio Safe Hoods(Biological Safety Cabinets) |
| Hospital Operating Theaters & Intensive care units |
| Atomic Research |
| Pre filter stage to ULPA systems |
|
