Technical Details
Cleanliness	CLASS 100
Particle retention	0.3 micron & above
Velocity	90 FPM + 20%
Illumination	750 - 800 lumen
Noise level	60 - 65 decibles (A)
Vibration level	200 micron pp.
Standard	ISO 14644-1
Power supply	220V Single Phase

AEROMECH   Laminar    Flow   equipment are constructed  by using industrial block boards with exterior surface covered by decorative laminated  sheets &   inner  surface   coated  with synthetic rubber paint. Air tight joints are  ensured  by  using best quality adhesives.

HEPA   filters  made of  micro   clean   glass  fibre  paper   of imported origin with fine corrugated aluminium foil separators. Pressure   drop   will   be   23    mm  WG.   Pre    filters   are manufactured by using synthetic non woven  polyester  fabric material    with   HDPE  mesh reinforcement on  both   sides. Both the filters are protected by suitable grill arrangement.

Blower assembly consists of a  single  phase, double    shaft motor,  directly   coupled   with  a    pair  of  centrifugal   type aluminium    impeller &  enclosed within a specially designed MS casing.

Optional accessories includes Stainless steel work   table  in lieu of Laminated table, UV lamps, Clear acrylic front   doors, Standard  accessories   includes   power   points,   Pressure manometer   castor   wheels  or leveling screws, illumination, side screens etc.

CAH 1800 S

Horizontal  flow  model  with bottom stand arrangement. This type  of   Laminar air flow benches are used for tissue culture applications.  It provides more leg space & thereby helps   to keep  the surrounding clean. Vibration is reduced   to  a  very minimum level  by keeping the total work station on a   heavy duty   structural work.  The   stainless  teel  work  table   is isolated from  the  main unit. An optional steri-pot holder  can be provided below the work table with control  switch  located adjacent to that.

DIMENSIONAL DETAILS