Fume Exhaust Cabinets / Systems / Hoods
Click
Here for Advanced Fume Exhaust Hoods/Cabinets/Systems
AEROMECH offers a wide range of FUME EXHAUST HODDS to suit every specific application of the user. The hood is fabricated from water proof commercial quality ply & block boards externally covered with industrial laminated sheets and interiors coated with epoxy paint over a suitable primer base . The inner walls of the working chamber is covered with epoxy coated asbestos or FRP or HDPE lining or as required. The working table is made of acid proof glazed tiles and provided with gas/air petcocks and additional power points, diffused fluorescent tubes.
The front shutter is of
shatter proof clear glass, framed in suitable
wooden structure with vertically sliding facility and is
connected with counter weight balancing arrangement.
The exhaust system consists
of a dynamically balanced centrifugal impeller, made
of PVC/FRP, directly coupled with a TEFC industrial motor
of 1440 RPM 3 phase 415 V and
control led by a DOL starter
with systems ranges from 500 CFM to
1250 CFM or above as it is proportional
to the dimensions of the hood.
Cleanair Fume exhaust hoods are provided with suitable ducting of FRP or PVC material with required diameter and length as per the site conditions.
Cleanair Fume exhaust hoods are also
available with full FRP construction or combination of FRP and Ply,
With or without work bench. We also design and
manufacture Scrubbers, Fume Extraction & Dust Collection Systems.
|
Model No. |
Working area in FT |
|
CAFH 1200 |
L 4
x D 2 x H2 L 5 x D 2 ½ x H 3 L 6 x D 3 x H 3 |
Click Here for Esco cleanroom Products
Products
Air Curtains
Air Showers
Bio Safety
Cabinets
Fume
Exhaust Hoods
Garment
Storage Cabinets
Horizontal
laminar Air Flow
Vertical
Laminar Air Flow
Dispensing
/ Sampling Booths
Positive
Pressure Modules
Softwall
Clean rooms
Bag Filters
Fancoil Filters
Fine Filters
HEPA Filters
Mini-Pleat
HEPA Filters
Pre Filters
ULPA Filters
Servicing
& Validations
DOP
HEPA Filter Integrity Test
Particle
Count Testing
Flow
Visualization