| * Bag filters are available in any size
as per customer requirements, depending upon the air volume required
to be handled |
| * The filters can be fabricated with/without flange
as per customer's choice. |
| * Available in casing thickness from 0.5 mm to
1.5 mm in variants of Mild steel/Galvanised steel/Aluminium/Stainles
steel with a surface finish of enamel
painted or powder coated finish |
* Media is Non-Woven Polyester fibres chemically
bonded with a layer of woven High density poly ethylene(HDPE)
mesh for support on the exit side
resulting in a media that is mechanically very strong. Other medias
can
* be provided against specific requirements. |
|
* Electro - galvanished steel rod grill for
bag support.
* Bags are intra stitched to prevent bag ballooning.
* Stitch holes are sealed using synthetic sealants
* Bags are sealed with frame using synthetic sealants.
Epoxy sealants can be provided on specific requests.
|
| * Suitable for EU5 and EU6 operation as per DIN24185
part II or F5 & F6 as per EN779 |
| * Initial pressure drop of 8 mm WC. |
| * Filtration efficiency of 99% down to 5 micron
for IS7613 test dust No 2. |
